Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you require from the drop down box below. LED upgrade bulb pack also available for 6, 12 and 24V application - please select below or see part number CA1249LEDBK, noting that you may also need an LED flasher unit e.g. LEDFLASH3.
Converted for combined stop, tail, number plate illumination and indicator/turn signal function. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a high quality split RED and AMBER main plastic lens plus optional CLEAR side lens. Three single contact WEDGE T10 capless bulb holders. We offer this lamp in a choice of gloss black enamel or chrome plated finish, with and without side number plate illumination window.
Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.
Uses 3 x capless T10 base bulbs - 1 x 5w tail light, 1 x 21w stop light, 1 x 21W indicator. For spare conventional bulbs -
6 Volt - Please see B501-6V for tail light/number plate illumination and B921-6 for stop light and indicator.
12 Volt - Please see B501/B501-12V for tail light/number plate illumination and B921/B921-12 for stop light and indicator.
For a suitable wiring grommet for the rear of the lamp, please see part number 628 - noting once fitted in position, it is difficult to remove.