Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Push taps with threaded end connections for fitting to tank/solder pipework. Straight and 90 degree cork seal push taps with integral filter gauze.
Straight in line tap with male 1/4“ BSP male threads at both ends. Supplied complete with compression nuts and olives for fitting to either 1/4" or 5/16" OD copper pipe. Body length...
Straight in line tap with male 1/4“ BSP male threads at both ends. Supplied complete with compression nuts and olives for fitting to either 1/4" or 5/16" OD copper pipe. Body length...
Straight in line tap with male 1/4“ BSP male threads at both ends. Supplied complete with compression nuts and olives for fitting to either 1/4" or 5/16" OD copper pipe. Body length...
Fuel resistant (neoprene) rubberised cork gasket/seal that fits our 895 and 896 inline taps. 14mm in diameter, 3mm thick with 3mm hole in the centre.
Hexagonal push on/off in line tap with 1/8" and 1/4" BSP threads. 1/8" BSP thread into tank with integral filter element, 1/4" BSP outlet thread with 60 degree cone seat, complete with solder nut...
Hexagonal push on/off in line tap with 1/4" and 1/4" BSP inlet and outlet threads. 1/4" BSP thread into tank with integral filter element, 1/4" BSP outlet thread with 60 degree cone seat, complete...
Angled pull on/push off in line fuel tap with a pull/push knob with a cork seal and filter gauze attached. Offered with either a 1/4" BSP or 1/8'' BSP male thread into the tank. 7/16" TPI outlet...
Angled pull on/push off in line fuel tap with a pull/push knob with a cork seal and filter gauze attached. Offered with either a 1/4" BSP or 1/8'' BSP male thread into the tank. 7/16" TPI outlet...
Angled pull on/push off in line fuel tap with a pull/push knob with a cork seal and filter gauze attached. Offered with either a 1/4" BSP or 1/8'' BSP male thread into the tank. 7/16" TPI outlet...
Replacement cork and brass pull knob for CA977 and 201 type taps. Cork approximately 10mm diameter. Dimension under knurled head to end of cork 23mm. Brass section under knurled head is slotted.
Hexagonal push on/off in line tap with 1/8" and 1/4“ BSP threads. 1/8" BSP thread into tank, 1/4" BSP outlet thread with 60 degree cone seat for solder nut and nipple type fittings. Overall...
Hexagonal push on/off in line tap with 1/4“ BSP male threads. 1/4" BSP thread tank side, 1/4" BSP outlet thread with 60 degree cone seat for solder nut and nipple type fittings. Overall...
Pull on/push off in line fuel tap with a pull/push knob with cork seal and attached filter gauze. 1/8'' BSP thread into tank. 7/16" x 19TPI outlet thread for solder nut and nipple connection. The...