Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Dash rotary rheostat dimmer switch equivalent to Lucas part number 78405. 6.4mm x 21mm hexagonal shaft. 0-12.5 Ohms resistance, four 6.3mm blade connections. Excludes knob (Lucas part number...
Switch as Lucas PPG1 style light switch with pull/twist/pull action. Fits through 10mm hole max panel thickness 3mm with chrome retaining nut, hexagon shaft with spring loaded locating pin, three...
Floor mount starter switch for connecting directly into starter/battery cables, four mounting holes, two 5/16" terminals studs with nuts, as Lucas model ST18, 76427. Flange overall diameter...
Lucas type PRS3 or 31270 combined ignition and lighting switch as fitted to a variety of British cars, including Austin Healey Sprite and Austin A40 Countryman. Supplied without barrel and key...
Flat blade steel ignition key for the PLC2 switch used on Austin 7 and Morris 8 etc. Overall dimensions 32mm long x 19mmm wide, square tab 8mm deep x 7mm wide. 8mm hole in fob.
Small round surface mount toggle on/off switch, 28mm diameter x approx 13mm tall cover. Chrome plated cover (unscrews to get to terminals). Only suitable for 6 volt or 12 volt, maximum rating 3 amp.
Brake light switch, terminals protected by a rubber cover, connects to linkage with a spring, switch 30mm long x 33mm wide x 30mm tall with fixing hole centres 24mm, spring length including hook...
Brake light switch which connects to linkage with a spring. Electrical contacts 'breaks' on pull, in relaxed position the switch is on. No rubber cover .
Rotary on-off turn switch with black knob with two flattened grips. Short shank for metal dash. Requires 19mm panel hole, bezel 22mm diameter. Black knob with chrome bezel. Equivalent to Lucas...
Period brake switch. Bakelite type body. Lever arm action which makes contact when pulled. Originally fitted to RHD Ford cars/5cwt van & LHD E83W.
Period brake switch. Bakelite type body. Lever arm action which makes contact when pulled. Originally fitted to RHD Ford E83W and LHD cars/5cwt van.
Combined key on/off and off/side/head lamp switch, equivalent to the original Lucas PLC5 type switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are...
As Lucas pattern 51C 'pull on' brake switch, metal body 63mm wide x 35mm deep x 40mm tall with 51mm fixing hole centres, Flange mounted, brass screw terminals on top. Ford part reference Y-13480.
Interior light switch with stainless steel cover. Slides on/off, suitable for door pillar application. Cover approx 27mm x 51mm, holes 35mm.
Bulkhead fitting pull type starter switch (945), Lucas model type ST19/2, 76423 applicable for 6 or 12 volt application, all metal body with rubber shielded terminals for heavy cables. Ford part...
Bulkhead fitting pull type starter switch (945), as Lucas model type ST19/2, applicable for 6 or 12 volt application, metal case with PVC terminal block. Terminals for heavy cables. A lower cost...
Starter switch that attaches to the motor case, as Lucas model type ST9, 76439, 764150. Applicable for 6 or 12 volt applications. Ford part reference BE-11450
FAE 24050 12V Brake light switch fitted with twin spade/Lucar connections. Supplied with slotted baseplate - slot is 8mm wide and 40mm long - and spring.
Rubber cover for CA1400 remote starter solenoid with button. Dimensions 27mm diameter x 17mm tall with a 17mm opening.
Twin terminal push switch with self-adjusting plunger. Universal vehicle application. Use on door pillars etc. Mounting flange 36mm x 18mm, rear tube and terminals 42mm long, switch plunger 17mm...
Push contact switch with general as well as Land Rover glove box applications 13mm x 20mm body with 12mm long 5mm diameter plunger. 2 x 6.3mm spade/Lucar connections