Oil Filter Adaptor Kits
Oil Filters
Oil Cooling & Filter Relocation
Oil & Grease Application
Oils & Lubricants
Spark Plugs & Accessories
Ignition Parts
Fuel Pumps, Repair Kits, Regulators & Filters
Fuel, Brake & Clutch Hose & Fittings
Metal Pipe & Fittings
Taps & Valves
Fuel Filler Caps, Necks & Grommets
Water Cooling & Heater Units
Brake Servos, Clutch & Brake Hoses
Gauges & Instruments
Switches & Knobs
Lights & Reflectors
Electrical Accessories
Wiring
Classic Motoring Accessories
Tools, Consumables & Accessories
Clips, Clamps, Washers, Seals & Ties
Other Service Items - Wiper System Parts, Bulbs etc.
Menu
£GBP

  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Sign In / Up

Sign in to your account or register new one to have full control over your orders.

Sign In

New customer? Register

0Cart

Min. Shipping :£0.00

VAT (20%): £0.00

Total: £0.00

Expand Cart
£GBP

  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Sign In / Up

Sign in to your account or register new one to have full control over your orders.

Sign In

New customer? Register

Oil Filter Adaptor Kits
Oil Filters
Oil Cooling & Filter Relocation
Oil & Grease Application
Oils & Lubricants
Spark Plugs & Accessories
Ignition Parts
Fuel Pumps, Repair Kits, Regulators & Filters
Fuel, Brake & Clutch Hose & Fittings
Metal Pipe & Fittings
Taps & Valves
Fuel Filler Caps, Necks & Grommets
Water Cooling & Heater Units
Brake Servos, Clutch & Brake Hoses
Gauges & Instruments
Switches & Knobs
Lights & Reflectors
Electrical Accessories
Wiring
Classic Motoring Accessories
Tools, Consumables & Accessories
Clips, Clamps, Washers, Seals & Ties
Other Service Items - Wiper System Parts, Bulbs etc.
0Cart

Min. Shipping :£0.00

VAT (20%): £0.00

Total: £0.00

Expand Cart

Bulb Holders

Flexolite sell a large range of single and double contact, equal and offset pin bulb holders and inserts for many vintage and classic vehicle applications and common light units. Please browse our full selection below.

Product Image

FBH39 - Bulb holder for 39mm long festoon bulbs

From £3.25 (£3.90 inc. VAT @ 20%)

Compact bulb holder for 39mm long festoon bulbs with spade connections and central mounting hole. 6.3mm spade connections at either end. Compact plastic body 17mm wide x 50mm long (excluding...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

FBH42 - Bulb holder for 42 to 44mm long festoon bulbs

From £3.55 (£4.26 inc. VAT @ 20%)

Compact bulb holder for 42 to 44mm long festoon bulbs with spade connections and central mounting hole. 6.3mm spade connections at either end. Compact plastic body 17mm wide x 50mm long (excluding...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

SLBH3 - Black plastic tube type T10 WEDGE bulb holder - Wired 'Push-in'

From £3.17 (£3.80 inc. VAT @ 20%)

Black hard nylon capless bulb holder - tube type. Fits in many side light apertures including Wipac type lights and also Smiths Gauges. Supplied with wired terminals to allow fitting of capless...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

1156LED - 1156 or SCC BA15S Bulb holder base male socket with 2 wires

From £4.32 (£5.18 inc. VAT @ 20%)

This BA15S male socket connector, fitted with two 10cm wire tails, allows you to create a DIY wiring connection between your conventional bulb holder socket and LED clusters.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

927B - MCC/BA9S pilot bulb holder - single contact, with terminals and rubber grommet

From £5.95 (£7.14 inc. VAT @ 20%)

Rubber mounted flanged MCC/BA9S pilot light bulb holder. Equivalent to Lucas part number 554710. 15cm long wire tails finished in bullet connectors. shrink wrap sheath. Rubber feed through grommet...

Comparable to other manufacturer part numbers - 554710

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

1157LED - 1157 or BAY15D Bulb holder base male socket with 3 wires

From £4.86 (£5.83 inc. VAT @ 20%)

This BAY15D male socket connector, fitted with three 10cm wire tails, allows you to create a DIY wiring connection between your conventional bulb holder socket and LED clusters.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

1142BS - Replacement bulb holder for 1142 side light - Single contact for side light only, as original

From £28.34 (£34.01 inc. VAT @ 20%)

Original pattern side light bulb holder for our 1142S lamps, equivalent to the original Lucas 1142 type side lamp. Takes bulb part numbers B205 (6V) or B207 (12V). Each bulb holder.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

1142BD - Replacement bulb holder for 1142 side light - Double contact for side and indicator function

From £28.72 (£34.46 inc. VAT @ 20%)

Modified bulb holder for Lucas 1142 type lamps including the new 'Toby' 1142S. Double contact 1158/SBC/BA15D holder. Takes incandescent bulb part numbers B383 (6V) or B381 (12V) for a 5W side...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

1142BSIND - Replacement bulb holder for 1142 side light - side light and indicator conversion

From £32.88 (£39.46 inc. VAT @ 20%)

Converted bulb holder for 1142S lamps. Provides a side light and indicator conversion for lamps equivalent to the original Lucas 1142. Takes capless bulbs, part numbers B501 and B921A (12V only).

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

153 - Brass Bulb Holder - BA15S, BA15D & BAY15D

From £18.68 (£22.42 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

153s - Brass Bulb Holder - BA15S, BA15D & BAY15D - Single contact parallel pin BA15S

From £20.95 (£25.14 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

153e - Brass Bulb Holder - BA15S, BA15D & BAY15D - Double contact parallel pin BA15D

From £19.68 (£23.62 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

153o - Brass Bulb Holder - BA15S, BA15D & BAY15D - Double contact offset pin BAY15D

From £18.68 (£22.42 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

253 - Double ended bulb holder - BA15S or BA15D

From £21.99 (£26.39 inc. VAT @ 20%)

Double ended holder which accepts a plug or standard SCC BA15S or SBC BA15D bulb at either end. Threaded outside body. 

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

253S - Double ended bulb holder - BA15S or BA15D - Double ended bulb holder - Single contact

From £21.99 (£26.39 inc. VAT @ 20%)

Double ended holder which accepts a plug or standard SCC BA15S or SBC BA15D bulb at either end. Threaded outside body. 

Single contact holder which accepts a plug or standard SCC/BA15S bulb...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

253D - Double ended bulb holder - BA15S or BA15D - Double ended bulb holder - Double contact

From £22.99 (£27.59 inc. VAT @ 20%)

Double ended holder which accepts a plug or standard SCC BA15S or SBC BA15D bulb at either end. Threaded outside body. 

Double contact holder which accepts a plug or standard SBC/BA15D bulb...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

253D-Nickel - Double ended bulb holder - BA15S or BA15D - Double ended bulb holder - Double contact

From £26.24 (£31.49 inc. VAT @ 20%)

Double ended holder which accepts a plug or standard SCC BA15S or SBC BA15D bulb at either end. Threaded outside body. 

Nickel plated brass Double contact holder which accepts a plug or...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

253D-Brass - Double ended bulb holder - BA15S or BA15D - Double ended bulb holder - Double contact

From £26.24 (£31.49 inc. VAT @ 20%)

Double ended holder which accepts a plug or standard SCC BA15S or SBC BA15D bulb at either end. Threaded outside body. 

Brass Double contact holder which accepts a plug or standard SBC/BA15D...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

254 - Bulb holder plug - BA15S or BA15D

From £16.75 (£20.10 inc. VAT @ 20%)

Plug for SCC and SBC type bulb holders. Offered in double contact or single contact. Cables enter through back.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

254S - Bulb holder plug - BA15S or BA15D - Bulb holder plug - single contact BA15S

From £16.75 (£20.10 inc. VAT @ 20%)

Plug for SCC and SBC type bulb holders. Offered in double contact or single contact. Cables enter through back.

Plug for SCC BA15S type holder, single contact, cables enter through back.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

254D - Bulb holder plug - BA15S or BA15D - Bulb holder plug - double contact BA15D

From £16.75 (£20.10 inc. VAT @ 20%)

Plug for SCC and SBC type bulb holders. Offered in double contact or single contact. Cables enter through back.

Plug for SBC BA15D type holder, double contact, cables enter through back.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

CA605 - Bulb holder BA15 on mounting plate

From £9.17 (£11.00 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

CA605S - Bulb holder BA15 on mounting plate - Single contact BA15S bulb holder

From £9.20 (£11.04 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

CA605D - Bulb holder BA15 on mounting plate - Double contact BA15D equal pin bulb holder

From £9.17 (£11.00 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

BA15BH - Replacement BA15 bulb holders

From £3.78 (£4.54 inc. VAT @ 20%)

Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Comparable to other manufacturer part numbers - 0705

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

BA15SBH - Replacement BA15 bulb holders - Single contact BA15s

From £3.81 (£4.57 inc. VAT @ 20%)

Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Comparable to other manufacturer part numbers - 0705s

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

BAY15DBH - Replacement BA15 bulb holders - Double contact BAY15d offset pin

From £3.78 (£4.54 inc. VAT @ 20%)

Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Offset pin

Comparable to other manufacturer part numbers - 0705d

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

SLBH4 - Black rubber tube type T10 WEDGE bulb holder - Wired 'Push-in'

From £6.45 (£7.74 inc. VAT @ 20%)

Black soft rubber capless bulb holder - tube type. Fits in many side light apertures and also clock and gauge backs. Supplied with wired terminals to allow fitting of capless T10 and T15 wedge...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

BH-INSERT - Bulb holder single ended insert SBC/BA15D double contact - 14.5mm

From £7.89 (£9.47 inc. VAT @ 20%)

Double contact bulb holder insert, fits into many BA15 bulb holder bodies, including a number of vintage dash lamps, two spring loaded brass bulb contacts at one end with two spring type wire clip...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

153-SL - Single contact BA15s bulbholder with wire tail

From £11.16 (£13.39 inc. VAT @ 20%)

Single contact BA15s bulbholder with wire tail. Measures outside 17mm x 26mm long. Note the two barb tags to the side to hold this in place.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

211-CONV - Bulb holder sleeve (offset pin BAY15D) to convert 211 'Duolamp' lamps to Stop & Tail

From £15.68 (£18.82 inc. VAT @ 20%)

Bulb holder sleeve (offset pin BAY15D) and cotton braid pig tail wires which will fit into part number 211 series 'Duolamp' type lamps to enable a small (19mm diameter) globe double contact bulb...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

253-INSERT - Bulb holder double ended insert BA15D

From £12.95 (£15.54 inc. VAT @ 20%)

 Double contact, double ended SBC/BA15D bulb holder insert. Four spring loaded brass contacts allow it to be adapted for various applications. Overall length 27mm, insulator 11mm long x...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

254D-sol - Bulb holder plug - SBC/BA15D

From £16.81 (£20.17 inc. VAT @ 20%)

Double contact BA15D bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

254D-sol-N - Bulb holder plug - SBC/BA15D - Nickel

From £16.81 (£20.17 inc. VAT @ 20%)

Double contact BA15D bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

254D-sol-B - Bulb holder plug - SBC/BA15D - Brass

From £16.81 (£20.17 inc. VAT @ 20%)

Double contact BA15D bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

422 - Bulb holder single ended, SBC/BA15D double contact

From £21.77 (£26.12 inc. VAT @ 20%)

Single ended, double contact bulb holder. Dimensions thread diameter 19mm, overall length 38mm, flange 28.5mm. Accepts SBC BA15D bulb, rear nut removes to expose terminal contacts.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

422-INSERT - Bulb holder single ended insert SBC/BA15D double contact -16.7mm diameter

From £7.89 (£9.47 inc. VAT @ 20%)

Double contact bulb holder insert, fits our 422 bulb holder, two spring loaded brass bulb contacts at one end with two wire terminals at the other, insulator body dimensions 16mm long x 16.7mm...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

424 - Bulbholder for 1130 sidelamp BA15D equal pin double contact

From £23.47 (£28.16 inc. VAT @ 20%)

Double contact bulb holder for Lucas 1130 type side lamp, accepts double contact SBC BA15D parallel pin bulbs. Please note these are made to original pattern. These bulb holders allow conversion...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

700BH - 700 Bulb Holder for Lucas FT700 & CLR700 type fog/spot lamps

From £21.44 (£25.73 inc. VAT @ 20%)

High quality bakelite bulb holder for FT700 and CLR700 light units. Double contact, but one contact can be bent away to make single contact. 71.5mm OD, screw on, min ID 38.5 max ID 45mm

Comparable to other manufacturer part numbers - 554946

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

776BH - 776 Bulb holder (3 x BA15S) - Divider plate for Lucas ST38/'Pork Pie' type lamp

From £29.55 (£35.46 inc. VAT @ 20%)

Replacement bulb holder divider plate for 776/ST38/'Pork Pie' type rear lamps. Accepts 3 x BA15S bulbs. Made to the original specification.

Comparable to other manufacturer part numbers - ST38

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

853 - Headlamp converter bulb holder - SBC/BA15D double contact

From £16.96 (£20.35 inc. VAT @ 20%)

Double contact headlamp converter for most many headlamps which are mounted through the rear of reflector bowl - usually held in place in the bulb holder socket on Lucas reflectors with clamp clip...

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

927 - MCC/BA9S bulb holder - single contact

From £2.64 (£3.17 inc. VAT @ 20%)

MCC/BA9s bulb holder, 10.4mm diameter, useful general application spare for equal pin bayonet base 9mm cap bulbs. Single contact.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

927A - MCC/BA9S bulb holder - single contact

From £7.47 (£8.96 inc. VAT @ 20%)

MCC/BA9s bulb holder. 12.3mm diameter, overall length 18.5mm, useful general application spare for bayonet base 9mm cap equal pin bulbs. single contact, supplied with connectors and terminals.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

1130BH-DC - 1130 lamp bulb holder - BAY15D Double Contact Offset Pin

From £19.48 (£23.38 inc. VAT @ 20%)

1130 lamp bulb holder. BAY15D base for double contact, offset pin bulbs - B380 for 12V and B384 for 6V 21/5w

Comparable to other manufacturer part numbers - 1130BH

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

1130BH-SC - 1130 lamp bulb holder - BA15S Single Contact

From £19.48 (£23.38 inc. VAT @ 20%)

1130 lamp bulb holder. BA15S base for single contact, equal pin bulbs - B382 for 12v and B317 for 6V 5W

Comparable to other manufacturer part numbers - 1130BH

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

572783 - Bulb holder for L489 lamps - BA9S single contact

From £16.10 (£19.32 inc. VAT @ 20%)

Bulb holder for Lucas L489 type side lamps - MCC/BA9S bulb holder fitting, single contact.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

BA7SBH - BA7S Bulb holder - single contact

From £3.25 (£3.90 inc. VAT @ 20%)

BA7S bulb holder fitted with 12V 2W bulb. Twin 6.3mm push on/Lucar rear terminal connections. For replacement bulbs please order B282 (6V) or B281 (12V)

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

H1BHC - H1 Ceramic Bulb Holder

From £1.66 (£1.99 inc. VAT @ 20%)

H1 headlamp socket ceramic connector. 11mm high, 15.1mm wide and 25mm long. With 10cm long single cable tail.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

H7BH - H7 Ceramic Bulb Holder

From £2.30 (£2.76 inc. VAT @ 20%)

H7 headlamp socket ceramic connector. 14.5mm high, 20.5mm wide and 23.5mm long. With two 10cm long single cable tails.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

H4BHC - H4 bulb holder - Ceramic

From £2.80 (£3.36 inc. VAT @ 20%)

H4 P43T headlamp socket ceramic connector. 21mm high, 27mm wide and 24mm long. High performance connector with 10cm long blue white and black cable tails.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

H4BHP - H4 bulb holder - Plastic with brass flag terminals

From £2.22 (£2.66 inc. VAT @ 20%)

Standard plastic H4 headlamp socket. 219mm high, 26mm wide and 21mm long. Supplied with three brass flag terminals for crimping on to wire and connecting to male Lucar/spade terminals

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

L488BHSC - L488 Bulb holder BA15S single contact

From £10.90 (£13.08 inc. VAT @ 20%)

Single contact bulb holder for Lucas L488 lamps

Comparable to other manufacturer part numbers - L488BHSC

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

L488BHTW - L488 Bulb holder twin contact BAY15D offset pins

From £10.90 (£13.08 inc. VAT @ 20%)

Twin contact bulb holder BAY15D (offset pins) for Lucas L488 lamps

Comparable to other manufacturer part numbers - L488BHTW

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

L539BASE - Bulb holder for L539 lamps SCC/BA15S single contact

From £19.26 (£23.11 inc. VAT @ 20%)

Twin wired base plate with 1156/SCC/BA15S single contact bulb holder with foam gasket for Lucas type L539 lamps.

76mm Outer diameter
46mm between fixing holes

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

L594BHSC - L594 Bulb holder BA15S single contact

From £12.20 (£14.64 inc. VAT @ 20%)

Bulb holder BA15S single contact for Lucas L594 lamps

Comparable to other manufacturer part numbers - L594BHSC

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

L594BHTC - L594 Bulb holder twin contact BAY15D offset pins

From £10.72 (£12.86 inc. VAT @ 20%)

Twin contact BAY15D bulb holder (offset pins) for Lucas L594 lamps. For stop and tail or front clear side and indicator.

Comparable to other manufacturer part numbers - L594BHTC

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

SLBH1 - WEDGE T10 Push in plastic bulb holder for capless bulbs - Flange type

From £3.49 (£4.19 inc. VAT @ 20%)

Push in plastic bulb holder for capless bulbs. Supplied with two wire crimp terminals for capless bulbs. Fits jewel lights, ST38 conversion and 1130 conversions. Dimensions main body 28mm long x...

Comparable to other manufacturer part numbers - SLBH, S6005

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

SLBH2 - WEDGE T10 Push in black plastic capless bulb holder - Tube type

From £2.62 (£3.14 inc. VAT @ 20%)

Black nylon capless bulb holder - tube type. Fits many side light apertures including Wipac type lights and also Smiths Gauges. Supplied with two crimp wire terminals to allow fitting of capless...

Comparable to other manufacturer part numbers - SVC-13-1567-BK

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering
Product Image

T10BH - WEDGE T10 bulb holder - Wired 'Twist-in'

From £3.70 (£4.44 inc. VAT @ 20%)

Twist fit bulb holder for T10 wedge base. 15mm aperture diameter.

Flexolite - Other Service Items - Wiper System Parts, Bulbs etc. - Bulb Holders
WishlistDetails & Ordering