Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
A large range of oilers including straight, angled, flip top and Winkley (rotating sleeve) pattern, offered with a selection of connections - push fit, 1/8" BSP, 1/4" BSF, 3/16" BSF and 5/16" BSF. Winkley pattern oilers are usually fitted horizontally and the outer sleeve turns to cover the oil hole. Most oilers are offered in a nickel finish only.
Flip top flap oiler, nickel plate finish, 7/16 hexagon, 1/8" BSP thread.
Small flip top flap oiler, self colour brass finish, 1/4" (6.6mm) hexagon, 1/4" x 26 TPI thread (1/4"BSF), only 6mm tall. This oiler is particularly used on bicycles
Flip top flap oiler, nickel plate finish, 3/8" hexagon, 1/4" x 26 TPI thread.
Small angled flip top flap oiler, 1/4" BSF thread
Flip top flap oiler, nickel plate finish, push fit into a 3/16" hole.
Flip top flap oiler, nickel plate finish, push fit into 1/4“ hole.
Angled 90° spring loaded flip top oiler, nickel plate finish, push fit into 1/4“ hole. Overall dimensions 20mm long x 14.5mm tall
Winkley pattern rotating sleeve oiler, nickel finish. 1/8" BSP thread x 23.5mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.
Winkley pattern rotating sleeve oiler, nickel finish. 3/16" BSF thread (32 TPI) x 18mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.
Winkley pattern rotating sleeve oiler, nickel finish. 1/4" BSF thread (26 TPI) x 18mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.
Winkley pattern rotating sleeve oiler, nickel finish. 5/16" x 26 TPI cycle thread x 22mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole. This...
Winkley pattern rotating sleeve oiler, nickel finish. 5/16" BSW thread (18 TPI) x 20mm tall overall. These are usually fitted horizontally and the outer sleeve turns to cover the oil hole.