Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Round rear stop and tail lamp with single flat "reflective" red glass lens. Polished stainless steel body 97mm diameter x 61mm deep (74mm including bulb holders), rear mounting bolts with 45mm...
A small LED stop and tail light that is fully E marked so the light output is very bright. This light would work well on a wide range of cars with the advantage of being LED so taking a very small...
Rear lamp equivalent to the Lucas 529 type. Stop, tail and number plate illumination. Fitted to many motorcycles. Steel base with rubber mounting pad, two piece high quality polycarbonate red...
Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L525 type. Fitted to Triumph TR2 and TR3 as well as many motorcycles. Chrome plated steel base with polycarbonate red and...
Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L564 type. Fitted to many classic motorcycles from BSA, Triumph, Norton in the period c1955-70. Stainless steel base with...
Rubber body with boot and formed metal mounting bracket with two mounting holes. An ideal lamp for hiding on older cars. With amber lens for Indicator service. 48mm Diameter. Uses a BA15S bulb,...
Rubber body with formed metal mounting bracket with two mounting holes. Ideal for hiding/unobtrusive mounting on older cars. With red lens for a stop and tail light fuction. 48mm Diameter. Uses a...
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm....
Recessed lamp - rubber boot/body (approx 74mm diam) chrome rim, clear glass lens (25mm depth from mount panel), Lucas model L488 with flat lens, mounts through 35mm panel hole. Supplied with a...
Recessed stop and tail lamp with rubber boot and body (approx 74mm diameter), chrome rim and red glass lens. 25mm depth from mount panel. As Lucas model L488 with flat lens. Alternative part...
Recessed lamp (approx 72mm diam) - rubber boot/body, chrome rim, clear glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Panel hole for fixing 35mm. Supplied with a BAY15D...
Recessed lamp (approx 72mm diameter) with rubber boot and body, chrome rim and red glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Alternative part number 53564. Panel...
Land Rover Clear Lens Amber bulb Indicator, 73mm overall outer diameter. Uses a BA15S amber bulb - for spare bulbs please see our B343. LED upgrade lamps and kits are available for these types of...
Land Rover stop & tail lamp 73mm outer diameter. Uses a BAY15D bulb, for spare bulbs please see B380 (12v). LED upgrade lamps and kits are available for these types of lamp - please see...
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable...
Rear stop and tail lamp equivalent to the L549 type for mounting on to sloping rear wing panel. Red plastic lens. Chrome base plate with flat back rubber mounting pad. Base 85mm x 142mm. Uses a...
Angle mounted stop and tail rear lamp equivalent to Lucas L471 type (alternative part number 53200). Glass lens approx 57mm deep, chrome bezel. Base approx 127mm x 62mm. Uses a BAY15D bulb. For...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
LED teardrop 1938-39 Ford Stop and Tail Light, originally for 1930s Ford. 28 Super Bright Red LEDs behind glass Lens, epoxy coated, fully sealed electronics. Includes stainless steel rim and black...
Good high quality reproduction Left Hand (near-side) rear lamp, equivalent to the Lucas L647 lamp. Three function lamp - indicator, stop and tail and reflector. Three stud fixing on the back,...
Good high quality reproduction Right Hand (off-side) rear lamp, equivalent to the Lucas L647 type lamp. Three function lamp - indicator, stop and tail and reflector. Three stud fixing on the back,...
Stop and tail lamp with double contact bulb holder equivalent to Lucas type L691/2. Alternative part number 54296. Rim diameter 83 mm. "E" Marked. Applications include Austin Healey, Hillman Imp,...
Good high quality reproduction L/H (near-side) rear lamp, suitable equivalent of the Lucas L940. Four function lamp - indicator, stop and tail, reverse and reflector. Four stud fixing on the back,...
Good high quality reproduction R/H (off-side) rear lamp, suitable equivalent of the Lucas L940. Four function lamp - indicator, stop and tail, reverse and reflector. Four stud fixing on the back,...
95mm LED with Stop & Tail functions. Red Reflector. E Approved. Works with 12v and 24v.
95mm LED Rear Fog. Red reflector. E Approved. Works with 12v & 24v.
95mm LED Reverse. Clear reflector. E Approved. Works with 12v & 24v.
95mm LED Brake & Tail. Clear reflector red LED's. E Approved, Works with 12v & 24v.
95mm LED Rear Fog. clear lens with red LED's E Approved. Works with 12v & 24v.
95mm surface mount base.
Land Rover LED RED lens stop and tail light, same size as the original Land Rover lights - 73 mm diameter.
Multi input voltage 9-33V.
E Marked. SAE Approved.
Waterproof to IP67.
Quality...
Land Rover LED CLEAR lens stop and tail that lights up Red, same size as the original Land Rover lights - 73 mm diameter.
Multi input voltage 9-33V.
E Marked. SAE Approved.
Waterproof to...