Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Amber lensed lamp equivalent to Lucas L539 type with double contact bulb holder. Diameter 83mm. Applications include Austin, Bentley, Bristol, Cobra, MG, Riley, Rolls Royce, Rover and Vauxhall....
Vintage 'Toby' side lamp equivalent to Lucas part number 1142. Originally fitted to many quality cars including Rolls-Royce and Bentley. All brass construction with chrome finish to lamp body, rim...
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V....
Chrome split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function, fitted...
Black split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. fitted with...
Toby chrome ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR Number Plate...
Toby black ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR & Number Plate...
Indicator lamp of vintage appearance, modelled as the equivalent of the Lucas rear lamp type 582. Amber plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Chrome...
Rubber body with boot and formed metal mounting bracket with two mounting holes. An ideal lamp for hiding on older cars. With amber lens for Indicator service. 48mm Diameter. Uses a BA15S bulb,...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with:
Red flat main lens, one red side lens and one clear side lens for stop, tail and...
A neat rubber side bolt mounted indicator lamp, moulded to match the original Rubbolite 25 lamp, without any side lens (for number plate illumination). Supplied with a domed amber lens as standard...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Indicator lamp of vintage appearance, modelled as the equivalent of the Lucas rear lamp type L582. Amber plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Black...
Indicator lamp of vintage appearance, modelled as the equivalent of the Lucas rear lamp type 582. Amber plastic lens 55mm dia, body 58mm long x 42mm diameter, overall length 92mm. Nickel body. We...
Torpedo style side lamp, reproduction of the Lucas 1130 type. Chromium plated body approx 100mm long x 46mm diameter, amber plastic moulded lens.
Double filament bulb holder (allows combined side...
Internally modified torpedo-style side/wing lamp. Reproduction of the streamlined Lucas 1130-type. Chromium-plated brass body approx 100mm long x 46mm diameter. Frosted glass lens with chrome rim...
Internally modified torpedo style side lamp, reproduction of the Lucas 1130 type light. Chromium plated body approx 100mm long x 46mm diameter. Frosted glass lens with chrome rim held with screw...
Internally modified torpedo style sidelamp, reproduction of the Lucas 1130 type. Chromium plated on brass body approx 100mm long x 46mm diameter. Clear plastic lens held with screw in top, the...
Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim with amber glass lens (25mm depth from mounting panel). Lucas model L488 with flat lens. Mounts through 35mm panel...
Recessed lamp - rubber boot/body (approx 74mm diam) chrome rim, clear glass lens (25mm depth from mount panel), Lucas model L488 with flat lens, mounts through 35mm panel hole. Supplied with a...
Recessed lamp, approximately 72mm in diameter with rubber boot and body. Chrome rim with amber glass lens 45mm deep. Equivalent to Lucas model L594 with raised lens. Panel hole for fixing 35mm....
Recessed lamp (approx 72mm diam) - rubber boot/body, chrome rim, clear glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Panel hole for fixing 35mm. Supplied with a BAY15D...
Land Rover Style Indicator 73mm overall outer diameter. Uses a BA15s bulb, for spares bulbs please see B382 (12v). LED upgrade lamps and kits are available for these types of lamp - please see...
Land Rover Clear Lens Amber bulb Indicator, 73mm overall outer diameter. Uses a BA15S amber bulb - for spare bulbs please see our B343. LED upgrade lamps and kits are available for these types of...
High quality protective grille for Land Rover lights part number 300A, 300CA, 300LC and 300ST (Land Rover part numbers RTC5013, RTC5012, RTC5523) as well as the S60 series part number LED upgrade...
Two T10 edge base bulbs (amber for flasher, clear for sidelamp) - 12 volt and 6 volt now available! Please select required voltage from the drop down menu below.
Bulb holder for fitting into...
Amber lensed indicator equivalent to Lucas L539 with single contact bulb holder. Diameter 83mm. Applications include Alvis, Austin, Bentley, Bristol, Cobra, MG, Riley, Rolls Royce, Rover and...
Clear lensed side lamp or indicator for 5W side or 21W amber bulb equivalent to the Lucas L539 type. Single contact bulb holder. Diameter 83mm. Applications include Alvis, Austin, Bentley,...
Indicator and front side lamp equivalent to Lucas L632 (alternative part number 52572). Applications include MGA, Morris Minor, Austin and Morris 1100, 1300 and Mini Moke. Lens diameter 80mm...
Chrome pedestal indicator lamp as Lucas type L874. Lens diameter 65mm x 35mm deep, overall lamp body depth 92mm tapering at the back to 30mm. Stem 120mm long (10mm diameter 100m long plain section...
Lucas type L874 Chrome pedestal indicator lamp, lens diameter 65mm x 35mm deep, overall lamp body depth 92mm tapering at the back to 30mm. Stem 80mm long (including thread 19mm) x 10mm diameter....
Pair of right angled brackets for L875 pedestal indicators when fitted onto an MG TD. Base dimensions are 28mm wide x 55mm (deepest point) with slotted hole 20mm x 10mm. Lamp mounting plate...
Chrome pedestal indicator lamp, lens diameter 35mm, overall lamp body dimensions 50mm diameter x 60mm deep. Stem 75mm long (including thread 25mm) x 10mm diameter. Uses an SCC BA15S bulb - for...
Chrome pedestal indicator lamp, lens diameter 35mm, overall lamp body dimensions 50mm diameter x 60mm deep. Stem 50mm long (15mm (and 15mm diameter) plain section plus thread 35mm). M8 thread....
Chrome pedestal indicator lamp with full lens, lens diameter 50mm, overall lamp body dimensions 50mm diameter x 70mm deep. Stem 72mm long (50mm plain section - 15mm diameter - plus 22mm long...
Chrome pedestal indicator lamp with full lens, lens diameter 50mm, overall lamp body dimensions 50mm diameter x 70mm deep. Stem 50mm long (15mm plain section - 15mm diameter - plus 35mm threaded...
Small, best selling lamp of modern manufacture particularly suitable for flashing indicator use. Chrome plated body with amber lens. Body approximately 58mm diameter x 70mm long. Single mounting...
Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...
Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
Reproduction CAV pattern Torpedo side lamps, chrome or nickel plated. Fitted with circular chrome or nickel on brass 'Toby' badge on top, as applied to our finest early lamp and mirror...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are...
Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you...
Free standing chrome body rectangular indicator lamp with amber lens, lens 60mm x 45mm, 52mm deep. Mounting by single 10mm bolt through which wire passes. SBC BA15D bulb base. Fitted with 12 volt...
Very small chrome warning/indicator lamp with amber lens. (40mm x 25mm x 40mm depth). Please note that this unit accepts MCC BA9S bulbs, most of which do not have the watts available for 21w/42w...
Reproduction of the Lucas L563 Jaguar Mk2 and XK150 indicator light, clear lens. Uses a BA15s amber bulb 12v only, for spare bulbs please see our B343.
Sidelight and flasher as fitted to MG Midget, Austin Healey Midget and Reliant Scimitar SE4. 150 mm long x 55 mm high x 30 mm deep. Fitted with BA15S and BA9S type bulbs - for bulbs, please see...
Amber lensed indicator equivalent to Lucas type L691/2 . Alternative part number 52751. "E" Marked. Diameter 83 mm. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Uses a...
Clear lensed indicator with amber bulb. Equivalent to Lucas type L691. Alternaive part number 52649. "E" Marked. Diameter 83 mm. Applications include - Austin Healey, Hillman Imp, AC Cobra,...
Amber lensed indicator equivalent to Lucas type L794 . Alternative part number 54990. "E" Marked. Diameter 83 mm. Applications include Morgan. Uses a BA15S bulb. For bulbs please see our B317 (6v)...
Black pedestal indicator lamp with full lens, lens diameter 50mm, overall lamp body dimensions 50mm diameter x 70mm deep. Stem 50mm long (15mm long plain section (15mm diameter) plus 35mm threaded...
95mm LED Front & Rear Indicator. Clear reflector. Universal modular signalling. E Approved. Works with 12v & 24v.
Ring 95mm LED Front & Rear Indicator. Amber reflector. E Approved, Works with 12v & 24v.
Land Rover LED AMBER indicator, same size as the original Land Rover lights (73mm diameter) and also used as front indicator on Caterham 7. Can be used in front or rear application.
Multi input...
Land Rover LED CLEAR lens indicator that lights up Amber, same size as the original Land Rover lights (73mm diameter) and also used as front indicator on Caterham 7. Can be used in front or rear...