Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Pull out dash lamp, all brass construction, screw on end cap fitted with either a polished brass or nickel plated 'Toby' medallion recessed into the top, as applied to our finest early lamp and...
Pull out dash lamp, all brass construction, screw on end cap fitted with either a polished brass or nickel plated 'Toby' medallion recessed into the top, as applied to our finest early lamp and...
Pull out dash lamp, all brass construction, screw on end cap fitted with either a polished brass or nickel plated 'Toby' medallion recessed into the top, as applied to our finest early lamp and...
Pull out dash lamp, all brass construction, screw on end cap fitted with either a polished brass or nickel plated 'Toby' medallion recessed into the top, as applied to our finest early lamp and...
Pull out dash lamp, all brass construction, screw on end cap fitted with either a polished brass or nickel plated 'Toby' medallion recessed into the top, as applied to our finest early lamp and...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
Reproduction dash lamp, equivalent to the Lucas DF41 type lamp, chromium cowl with 'Toby' medallion on top, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, centre hole...
Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 17mm. Overall 46mm tall x 26mm wide when fitted. Top cover pulls off to change bulb. No switch in this unit. Black finish...
Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 10mm. Overall 57mm tall x 25mm wide when fitted. Top cover pulls off to change bulb. Basic switch on stem side. Dull...
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
Bracket mount type dash or panel lamp. Mounting plate 23mm x 65mm (can be cut smaller) with lamp fitted. Stainless steel cover (pulls off to change bulb) and basic switch. Applications include...
Interior lamp Rover P5 and P5B suitable for multiple applications. This lamp is designed to work with door opening switches to turn the light on, it also has a switch on the base to manually...
Small plastic interior lamp fitted to MGB, Austin Healy Sprite and MG Midget 1967 to 1979 as well as other vehicles. Fitted with 12V festoon bulb.
Small plastic interior roof lamp fitted to classic Mini (1974 to 1985 ) and MGB GT as well as other vehicles. Size 4.25" x 1.75". Fitted with 12V festoon bulb
Surface fitting, mounting holes 50mm centres, chromium plated base, prismatic glass lens, held with threaded knurled ring, 89mm diameter x 57mm deep. Double contact bulb holder, separate switch...
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mount warning lamp with metal rim which unscrews to change bulb. 13.4mm diameter, push fit into a 13.4mm panel hole. twin wires to rear.
order BA7 bulb separately if required
Small panel mount warning lamp with metal rim which unscrews to change bulb. 13.4mm diameter, push fit into a 13.4mm panel hole. twin wires to rear.
order BA7 bulb separately if required
AMBER dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
BLUE dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
GREEN dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
RED dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...
Amber 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb...
Blue 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb...
Green 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb...
Red 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb holder...
Chrome rimmed warning light, green indicator single arrow. Rim diameter 16mm approx. Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on/Lucar rear...
Chrome rimmed warning light, green indicator twin arrow. Rim diameter 16mm approx. Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on/Lucar rear...
Chrome rimmed panel warning light, green dipped lights. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar...
Chrome rimmed panel warning light, red brake warning. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar...
Chrome rimmed panel warning light, green front fog light. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar...
Chrome rimmed panel warning light, red engine warning. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar...
Chrome rimmed panel warning light, amber heater fan. Rim diameter 16mm approx, hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar rear...
Chrome rimmed panel warning light, amber low fuel warning. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V, 2W bulb as standard. 6.3mm push on...
Chrome rimmed panel warning light, red hazard lights. Rim diameter 16mm approx, hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar...
Chrome rimmed panel warning light, red ignition warning. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar...
Chrome rimmed panel warning light, blue main beam. Rim diameter 16mm approx, hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar rear...
Chrome rimmed panel warning light, red oil pressure. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar rear...
Chrome rimmed panel warning light, Amber rear fog warning. Rim diameter 16mm approx, hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on...
Chrome rimmed warning light, green side lights. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V, 2W bulb as standard. 6.3mm push on spade/Lucar rear...