Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Large 12-volt electric horn with chrome cover fitted with chrome on brass 'Toby' medallion in the centre and stainless steel domed nuts around the edge of the cover, in the style of the 'Altette'...
Small 12-volt electric horn with chrome grill and chrome on brass TOBY badge to centre. Stainless steel domed nuts around the rim in the style of the 'Altette' horn. Approximately 100mm in...
Lucas 'Altette' horn with chrome rim. A high quality reproduction from Lucas Classic of the of the original Lucas HF1234B horn. 12 volt. Many applications include MG TA, TB & TC etc. For flat...
Flat mounting bracket for use with part number ALT-12. Equivalent to Lucas part number 700168. 125mm total bracket length with 11.25mm diameter fixing hole. Black powder coated steel.
Flat mounting bracket for use with part number ALT-12. Equivalent to Lucas part number 701639. 90mm total bracket length with two 7.5mm diameter fixing holes, 25mm between centres. Black powder...
High quality 12V horn made by Klaxon in France. Gloss black finish. KW9 model (CH5070105, 722367). 92mm body diameter, 67mm total depth including front central spigot and rear mounting bolt....
Small 12 volt electric horn with chrome grill. Approximately 100mm diameter and 55mm deep. Single hole fixing bracket
Small 6 volt electric horn with chrome grill. Approximately 100mm diameter and 55mm deep. Single hole fixing bracket.
Large and noisy 12 volt electric horn. Approximately 150mm diameter x 90mm deep (front to back). Chrome grill, mounting arm supplied.
6 Volt Horn - black with chrome ring, attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm mounting hole
12 Volt Horn - black with chrome ring attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade/Lucar terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm...
Small 12 volt electric horn with black body. Approximately 100mm diameter and 55mm deep. Single hole fixing bracket with 8.3mm hole. Two 6.3mm slade/Lucar type connections
High quality 12 volt all black disc horn. 75mm diameter with mounting bracket and 8mm clearance hole.This horn has two terminals so the body of the horn is insulated, making it suitable for 12...
High quality reproduction horn equivalent to the original Lucas 'Altette' type, with chrome rim on L-shaped bracket with a 10mm mounting hole. 12 volt. Applications include MG TC etc. Stamped...
Klaxon type horn. Makes the wonderful traditional sound of OOOOO-HA. Black trumpet. Very loud at 110db. Universal 12V application. These are by far the best quality klaxon type horns on the market...
Klaxon type horn. Makes the wonderful traditional sound of OOOOO-HA. Chrome trumpet. Very loud at 110db. Universal 12V application. These are by far the best quality klaxon type horns on the...
Klaxon type horn. Makes the wonderful traditional sound of OOOOO-HA. Red trumpet. Very loud at 110db. Universal 12V application
A modern variation of the traditional 'bull horn', making plenty of noise (115db). The robust electric 12 volt, 8amp horn is operated by a control lever in the cockpit. This is quite a large unit...
12V windtone horns with high and low notes. Black plastic body with chrome grilles and covers. 90 mm diameter body. Supplied with mounting brackets, screws, nuts, relay and instructions. E marked....
Mixo horns - pair. 12V High and Low tone horns. Super quality made by Klaxon in France.
A quality reproduction of Lucas 9H Windtone Horn, this one being the High Tone version. As used on many British cars and motorcycles from 1964 onwards. The matching Low Tone version is also...
A quality reproduction of Lucas 9H Windtone Horn, this one being the Low Tone version. As used on many British cars and motorcycles from 1964 onwards. The matching High Tone version is also...
Pair of Windtone horns giving high and low notes. This type of horn set was fitted to many British cars of the 1940s and 1950s, and provides a robust but musical ''hoot''. A quality reproduction...
Warning buzzer 12 volt. Another reminder for indicators!
Surface mounted switch equivalent to Lucas type SPB140 (model HD77). Base 50mm diameter, two bolt mounting through back (35mm hole centres). Side dip switch (lever 18mm long), front horn push...
Push button with flange for mounting on to dash, button head approximately 38mm diameter. Mounting flange 53mm x 35mm with two screw hole (hole centres 42mm). Equivalent to Lucas part numbers...
HP19/SPB160 horn push button engraved 'Klaxon'. Flanged for mounting on to dash. Button head approx. 38mm diameter. Mounting flange 53mm x 35mm with two screw holes.
Surface mounted, metal cased push button. Suitable for horn press button etc. Mounting hole centres 53mm, chrome rim approx 41mm diameter, black button.
Push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash. Maximum dash thickness 7mm. Requires 19mm hole. Makes contact when pushed. Equivalent to Lucas switch...
Push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash. Maximum dash thickness 7mm. Requires 19mm hole. Makes contact when pushed. Equivalent to Lucas switch...
Ivory colour - Solenoid starter (spring loaded) switch metal twin screw connectors. 22.5mm hole fixing. Short type for metal dash. Maximum dash thickness 5mm. Supplied complete with plastic lock nut