Small, disposable metal-bodied filter intended for use with solid state petrol pumps. 
From £2.50

38mm  fuel pressure gauge for direct mounting to pressure regulator or fuel line.
From £14.00

In-line petrol filters in chrome-plated alloy and toughened glass.  Can be dismantled for cleaning and replacement filter elements are available
Filter £12.00 - Replacement Element £2.00

A high quality, sliding vane 12 volt negative-earth pump (very quiet in use).  Designed for high-flow work.
From £92.00

A very easy to use fuel regulator with “click-stop” gradations. Ideal for older vehicles with weak float valves, to prevent flooding.
PFR1   £22.00

A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles (and can be switched between the two).
From £32.00

12 volt negative earth plunger pump for road or race use.  Road pumps have 1/8NPTF threads, race has 1/4NPTF.
From £59.00

Small, electronically-controlled petrol pump suitable for road or race use.  12 volt only but will work on negative- or positive-earthed vehicles.
From £42.00

This switch is activated by loss of oil pressure – in an accident or when the engine stalls – and will cut the power supply to the pump.
£11.00

52mm 0-15psi fuel pressure gauge for dashboard mounting. Has internal illumination
£24.00

Lightweight alloy in-line filter with a choice of mesh screen filter element or sintered bronze “porous metal” element
From £30.00 - Element £10.00

A high quality, sliding vane 12 volt negative-earth pump (very quiet in use).  Designed for high-flow work.
From £46.00 - Paper Element £3.50

Fitted just before the carburettor this will reduce the supply pressure to prevent flooding.  There is one inlet port, and two outlets, all 3/8NPTF.
From £30.00

Nickel-plated brass ball valve taps with Teflon seats.  Available with T-handle (above, right), or with lever handle.
From £6.25

Fitted in fuel line to enable fuel pressure gauge to take reading, Can be plugged when not in use.
From £9.00 - Steel Plug £1.00

Vintage-style tap which can be mounted in-line (or at tank outlet)
From £17.50 - Collars & Olives £3.00 per set

Anodized aluminium fuel tap, stainless steel ball-valve with Teflon seating.
From £38.00

We occasionally have supplies of fuel taps which are of interest to builders of racing cars, kit cars, vintage
specials etc.

Rubber end caps for use with braided stainless hose to protect users from loose sharp braids.
From £0.45

These end-finishers contain a stainless steel hose clip and are available in red or blue anodized finish or chrome-plated.
From £5.50

Nitrile rubber hose with a black cotton over-braid, suitable for use on low-pressure fuel systems (not for use on the high pressure side of fuel-injection systems). .
From £3.20 per mtr

Nitrile rubber hose with braided stainless steel braid, suitable for use on systems operating at up to 90psi (6bar).
From £5.60 per mtr

Slotted band worm-drive hose clips - the best kind - in stainless steel. .
From £00.18

Rubber-lined aluminium(APC) or stainless steel P-clips (SSPC)for holding hoses in place.
From £00.76

An insulating and heat-reflective aluminium oversleeve used to reduce petrol vapourisation in fuel lines.
From £6.80 per mtr

Available to join similar-sized or dissimilar-sized hoses.  Other sizes also available - also T-pieces, Y-pieces and similar connectors made to order.
From £1.40

Available in steel or brass.
From £4.50

Available in various sizes and gauges, including the most popular fuel-related types .
From £9.80 per mtr

Disc or flap valves used , for example, to control flow when two fuel pumps feed into one fuel line.
From £22.50

Required on racing cars, these valves allow air in and out of the tank to accommodate changing fuel levels,  but prevent fuel escaping if the car is inverted.
From £18.00

We make, stock, and supply a range of fuel-related fittings which is too large to list, including nylon, steel, brass, stainless steel, and aluminium fittings.

Bulkhead-mounting filter with detachable filter bowl containing replaceable paper element.
£28.50 - Element £3.50

Anodized alloy tubular body with stainless steel mesh filter element.
£28.00

Cast alloy filter bowl with stainless steel mesh filter element.
£22.00 - Element £4.50

Non-return valve with push-on spigots, suitable for use with two fuel pumps or to prevent fuel siphoning back to the tank when the pump is switched off.
£7.50

Flexolite are stockists of Bosch and Walbro fuel injection pumps for road, and competition use.
From £160.00

Allows the fuel pressure provided to the injector to be adjusted to suit the engine’s requirements – ideal for non-standard engines.
From £47.50

The power boost valve is an adjustable pressure-regulator valve for fuel injection systems and enables the user to tailor the system pressure to suit the engine characteristics.
From £68.00

This disposable steel-bodied filter can be placed in-line after the fuel injection pump (see also Bullet Filter).  
From £4.20

Acts as a header tank and fuel collector to ensure continuous supply of fuel to injector pump under extreme braking, accelerating, and cornering conditions.
£84.00